Our Products
Ultraplan Eco
Ultra-fast hardening self-levelling smoothing compound with very low VOC content. Applications: Interior levelling of new and existing substrates, as long as not subject to moisture, to make them suitable for receiving all types of flooring where high resistance to loads and traffic is required. Levelling existing floors provided they are solid, dry and clean. Ultraplan Eco is applied up to 10 mm thick per layer by trowel or pump. For the installation of wooden floors the minimum thickness must be 3 mm.
Ultraplan Eco 20
Rapid hydrating, fast-drying self-levelling smoothing compound.
Where to use:
Ultraplan Eco 20 is used in interiors for levelling and smoothing differences in thicknesses from 1 to 10 mm on new or existing substrates, preparing them to receive flooring where a medium resistance to loads and traffic is required. Ultraplan Eco 20 is especially suitable for residential and office area applications.
Eco Prim PU 1K
One-component, solvent-free, moisture curing polyurethane primer with a very low emission level of volatile organic compounds (VOC) for consolidating and waterproofing cementitious screeds.
TriBlock P
Three-component epoxy-cementitious primer for non-absorbent waterproofing damp substrates.
TECHNICAL DATA:
Consistency: comp. A liquid; comp. B liquid; comp. C powder.
Colours: comp. A white; comp. B white; comp. C white.
Mixing ratio: comp. A : comp. B : comp. C = 12 : 38 : 50.
Workability time: 30-40 minutes.
Waiting time between first and second coat: 4-6 hours.
Waiting time before laying floors or applying smoothing compound: 18 hours.
Maximum waiting time before laying floors or applying smoothing compound: 7 days.
Storage: 24 months.
Application: brush or roller.
Consumption: 0.5 kg/m².
Packaging: 5 kg drums (A+B+C).
ITE F10
Self Levelling Screed Compound
LEVELiTe F10 is a screed smoothing and levelling compound with excellent general purpose attributes for preparing screeds prior to the installation of vinyl and wood laminate flooring as well as carpets and other floor covering requiring a smooth, level finish.
ITE F30
Self Levelling Screed Compound
LEVELiTe F30 is a high quality self-levelling compound with excellent self-levelling and smoothing properties for preparing screeds prior to the installation of vinyl and wood laminate flooring as well as carpets and other floor covering requiring a smooth, level finish with high traffic carrying requirements.
ITE Vaporite Plus
Advanced moisture and vapour barrier
VAPORiTe+PLUS® is a deep penetrating two-part epoxy sealer which is designed for the creation of a moisture barrier on concrete substrates where excess screed moisture poses a problem for the application or installation of moisture sensitive finishes such as vinyl, rubber, linoleum and wood flooring. VAPORiTe+PLUS® is designed to allow very low levels of vapour or moisture to permeate through the membrane so that the subsequent layers comprising the complete system remain un-affected by the rising moisture. Residual moisture in the substrate which emanates from the concrete drying process can be dealt with successfully provided the sub-surface moisture is below 6%, and that the substrates are not exposed to excessive hydro static forces.